Sunday, March 29, 2009


1.0 SCOPE:
To provide guidelines to ensure effective line clearance of the area and equipment.
Operator, Production Officer.
3.1 Ensure that the area is cleaned as per SOP: PRGN:xxxxx
3.2 Ensure that Vibratory Sifter (30ӯ) is cleaned as per the SOP: PRCLxxxx; Point No: 3.1 for Batch change over/At the end of shift or is cleaned as per the SOP: PRCLxxxx; Point No: 3.2, for Product change over/Expiry of use before date.
3.3 Ensure that all containers, documents and labels of previous product / batch are removed and status board is updated.
3.4 Ensure that all the cervices and near by area is free from previous product.
3.5 Ensure that the sieves are cleaned, of correct product and check the integrity.
3.6 Ensure that all the gloves and accessories of previous product/batch are removed.
3.7 Ensure that gloves and accessories box is cleaned.
3.8 Check the Temperature, Relative Humidity and the Differential Pressure of the cubicle and enter the same in the Batch Manufacturing Record.
3.9 Line clearance is given by Production Officer to start the next batch, after checking the above-mentioned points, which is to be recorded in the Batch Manufacturing Record (BMR).
3.10 After checking all above points and the BMR, Final Line Clearance should be given by In Process Quality Assurance Officer.
3.11 Record the observations in the format PRLC:xxxxx
4.1 Line Clearance Checklist for Vibratory Sifter, format PRLC:xxxxx

No comments: