This SOP describes the procedure of using D. G. Set.
Responsibility of this operation is with maintenance department.
a) Check battery voltage.
b) Check suction air filter.
c) Check lubricant oil in oil pan.
d) Check diesel level in service tank.
e) Check water level in Radiator.
f) Check V belts.
g) Check the cleaning of Radiator.
h) Confirm that the capacitors of main panel are off.
i) Insert the key in control panel and press the bypass (yellow) button with one finger and press Green Start button for few seconds and release .DG will get started .DO NOT PRES GREEN BUTTON ONCE DG STARTS.
j) Check oil pressure. temperature.
k) Check speed , it should be 1500 rpm.
l) Check frequency, it should be 49.5 to 50.5 cps.
m) Check voltage and current.